A Complete Guide to Assessment Validation and Validating Assessments

A Complete Guide to Assessment Validation and Validating Assessments

Blog Article

RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.

Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.

Simply put, validation confirms which aspects of an RTO's assessment process are right and identifies where improvements are needed. A clear understanding of its main components makes it less intimidating.

Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.

The standards specify that two types of validation need to be performed.

The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.

The second validation ensures assessments are conducted according to the principles of assessment and rules of evidence.

It indicates that validation occurs both before and after the assessment. The focus here is on the first type: assessment tool validation.

What are the Two Types of Assessment Validation?

Assessment Validation: What It Is

As mentioned earlier and in our earlier blogs, validation is split into two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.

Conversely, post-assessment validation pertains to the implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

In this article, we will emphasize assessment tool validation.

How to Conduct Assessment Tool Validation

With a grasp of the two validation types, let’s focus on assessment tool validation.

Appropriate Times for Assessment Tool Validation

The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

This implies that any time you get new learning resources, assessment tool validation must be done before they are used by students.

You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.

Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:

- updating your resources
- new training products are added on scope
- your course includes training product updates
- learning resources get identified as a risk during your risk assessment

The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.

Selecting Training Products for Validation

Recall, this type of validation aims to ensure all learning resources are compliant before use. All RTOs must validate each unit's resources.

Resources Needed to Start Assessment Tool Validation

Educational Materials

To conduct assessment tool validation, you will need the entire suite of your learning resources:

Mapping tool – the first document to review. It indicates which assessment items meet unit requirements, aiding in faster validation.

Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item exist. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – may include checklists, registers, and templates developed separately from the workbook and marking guide. Validate these to ensure they suit the assessment task and address unit requirements.

Validation Team

Clause 1.11 specifies the requirements for validation panel members. It states validation can be performed by one or more people. However, RTOs usually require all trainers and assessors to participate, sometimes including industry experts.

Collectively, your validation panel must have:

Vocational competencies and current industry skills relevant to the unit being validated

Recent knowledge and skills in vocational teaching and learning

One of these training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or its replacement

Assessment validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool aids both the validation process and documentation. It simplifies seeing how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also serves as evidence that you have validated your resources before students use them.

ASQA does not specify a recommended or required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools in their entirety to ensure they meet the principles of assessment.

Principles of Assessment Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.

A more detailed template is highly recommended for inspecting each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Assessment Directions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Inspect?

As noted in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.

Assessment Principles
Fairness – Are equal opportunities and access ensured in the assessment process?

Flexibility – Does the assessment provide multiple options to show competence according to various needs and preferences?

Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?

Reliability – Will the assessment give the same results every time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Evidence Rules

Validity – Does the evidence show the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there adequate evidence to ensure the learner has the required skills and knowledge?

Authenticity – Does the assessment tool verify that the work is the candidate’s own?

Currency – Do the assessment tools reflect current units of competency and modern industry practices?

Despite being regularly covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.

To prevent using learning resources that do not meet some unit requirements, make sure to follow these guidelines:

Live Up to Your Words

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Carry out each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

change nappies

prepare bottles, feed babies from bottles, and clean equipment

prepare solids and feed infants

respond to baby signs and cues appropriately

prepare and settle infants for sleep

monitor and foster age-appropriate physical exploration and gross motor skills

Having students explain the process of nappy changing for babies under 12 months doesn’t meet the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students more info should be doing the tasks.

Keep an Eye on Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.

Complete Compliance or Not Competent

Pay attention to lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?

Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What information might be included in a work package?

Possible answers include:

Obligatory resources

Relevant costs

Duration of activities

Appointed roles and responsibilities

If an assessment item demands multiple answers, specify the number of answers required from a student. This ensures your assessment is reliable, and the evidence obtained is valid.

This is also true for assessment items with double-barrelled questions or those that require multiple answers at once. These can confuse students and assessors, as demonstrated in the sample question below:

Name a hazard and/or environmental issue in the work area and choose the most effective hazard control hierarchy.

Answers could include, but are not limited to:

Weather conditions – work area isolation, engineering controls, personal protective equipment

Work area and ground conditions – eliminating hazards, isolation, engineering

People – isolating, engineering controls, administration

Structural hazards – substitution, isolating, engineering controls

Chemical hazards – isolation, use of engineering controls, administrative controls

Equipment or machinery – isolation, use of engineering controls, administrative controls

Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.

Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.